Services

First, our serious philosophy on choosing your diving equipment service provider:
Even though we are in the business of servicing dive equipment, we truly believe the best place to have your equipment serviced is your local dive store.
They know you, they live in your community, and you should support them and they should support you.

But if that is not an option, we are standing by to serve you.

We offer factory trained service on almost every piece of sport diving equipment from every manufacturer made in the last 20 years.

A list of the manufacturers whose equipment we normally service includes:
(If it is not on this list, please call - we may still be able to help you.)

AGA full-face masks
Aqualung / USDivers / Apeks
Cressi
Dive Rite
Genesis

Mares
Neptune full-face masks
Oceanic/Aeris/Hollis
OTS Guardian full-face masks
Poseidon
Scubapro

SeaQuest
Sherwood
SubGear
TUSA
XS Scuba
Zeagle

 

     

 

 

 

 

A list of the manufacturers whose equipment we cannot service includes:

Arm-Sea
Apollo
Beuchat
Dacor prior to 1998

Oceanways
OMS regulators
Parkway
Pro Sub
Sea Elite
Techni-Sub
Tekna
US Tech
Z 90
Dacor Pacer series

 

 

 

 

Further, there is an age limit on the regs we can service, primarily due to parts availablity.
If you believe your regulator was built before 1996, please give us a call prior to shipping it to us. 866/287.0850.

For annual warranty service on regulators, we charge:

  • $35 per stage, plus parts, for our normal14 day service, or...
  • $45 per stage, plus parts, for 8 to 13 day service, or
  • $50 per stage, plus parts, for 3 to 7 day service, or...
  • $65 per stage, plus parts, for 24 to 48 hour service.

For this, we completely disassemble the regulator and clean all of the parts as prescribed by the manufacturer. We then reassemble the regulator, replacing the warranty parts (typically this includes but may not be limited to, the filter, valve seats, and dynamic O-rings), and inspecting all of the components. Once reassembled, the regulator is put on our flow bench and tuned to the manufacturer's specifications for interstage pressures, flow rates, cracking pressure (inhalation effort) and exhalation effort.

Annual service for a BCD is the same as for a regulator stage.
For this, we disassemble and clean the inflator valve, dump valve, and overpressure valves, check all the straps and buckles, and do a comprehensive leak test.

If our location is convenient for you, scuba cylinder hydrostatic tests are $40. Visuals are $20, and airfills $8. We are certified PSI Visual Inspectors and utilize their 18-point inspection protocol. 

Tank tumble is $40 per tumbling session. Cylinder oxygen cleaning is $50.

We are fearlessly unafraid of offering advice. Don't hesitate to call if we might be able to be of help.